#Cgminer rejected low difficulty share code#

avalon4-noncecheck-off Disable A3218 inside nonce check function avalon4-freq-max Set maximum frequency for Avalon4 (default: 1000) avalon4-freq-min Set minimum frequency for Avalon4 (default: 100) avalon4-ntcb Set Avalon4 MM NTC B value (default: 3450) avalon4-freezesafe Make Avalon4 running as a radiator when stratum server failed avalon4-miningmode Set Avalon4 mining mode(0:custom, 1:eco, 2:normal, 3:turbo (default: 0) avalon4-aucxdelay Set Avalon4 AUC IIC xfer read delay, 4800 ~= 1ms (default: 9600) avalon4-aucspeed Set Avalon4 AUC IIC bus speed (default: 400000) avalon4-ntime-offset Set Avalon4 MM ntime rolling max offset (default: 4) avalon4-polling-delay Set Avalon4 polling delay value (ms) (default: 20) avalon4-cutoff Set Avalon4 overheat cut off temperature (default: 65) avalon4-temp Set Avalon4 target temperature (default: 42) avalon4-fan Set Avalon4 target fan speed range avalon4-freq Set frequency for Avalon4, 1 to 3 values, example: 445:385:370 avalon4-voltage Set Avalon4 core voltage, in millivolts, step: 125

avalon4-automatic-voltage Automatic adjust voltage base on module DH avalon2-fixed-speed Set Avalon2 fan to fixed speed avalon2-cutoff Set Avalon2 overheat cut off temperature (default: 88) avalon2-fan Set Avalon2 target fan speed avalon2-voltage Set Avalon2 core voltage, in millivolts avalon2-freq Set frequency range for Avalon2, single value or range avalon-temp Set avalon target temperature (default: 50) avalon-options Set avalon options baud:miners:asic:timeout:freq:tech avalon-freq Set frequency range for avalon-auto, single value or range avalon-fan Set fanspeed percentage for avalon, single value or range (default: 20-100) avalon-cutoff Set avalon overheat cut off temperature (default: 60) avalon-auto Adjust avalon overclock frequency dynamically for best hashrate au3-volt Set AntminerU3 voltage in mv, range 725-850, 0 to not set (default: 775) au3-freq Set AntminerU3 frequency in MHz, range 100-250 (default: 225.0) api-port Port number of miner API (default: 4028) api-network Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1 api-mcast-port API Multicast listen port (default: 4028) api-mcast-des Description appended to the API Multicast reply, default: ''

anu-freq Set AntminerU1/2 frequency in MHz, range 125 - 500 ( default: 250.0 ) -api-allow Allow API access only to the given list of IP addresses -api-description Description placed in the API status header, default: cgminer version -api-groups API one letter groups G :cmd:cmd defining the cmds a groups can use -api-listen Enable API, default: disabled -api-mcast Enable API Multicast listener, default: disabled -api-mcast-addr API Multicast listen address -api-mcast-code Code expected in the API Multicast message, don 't use ' - ' ( default disabled ) -enable-cointerra Compile support for Cointerra ASICs ( default disabled ) -enable-drillbit Compile support for Drillbit BitFury ASICs ( default disabled ) -enable-hashfast Compile support for Hashfast ( default disabled ) -enable-icarus Compile support for Icarus ( default disabled ) -enable-klondike Compile support for Klondike ( default disabled ) -enable-knc Compile support for KnC miners ( default disabled ) -enable-minion Compile support for Minion BlackArrow ASIC ( default disabled ) -enable-modminer Compile support for ModMiner FPGAs ( default disabled ) -enable-sp 10 Compile support for Spondoolies SP10 ( default disabled ) -enable-sp 30 Compile support for Spondoolies SP30 ( default disabled ) -disable-libcurl Disable building with libcurl for GBT support -enable-libsystemd Compile support for system watchdog and status notifications ( default disabled ) -without-curses Compile support for curses TUI ( default enabled ) -with-system-jansson Compile against dynamic system jansson ( default use included static jansson ) enable-avalon Compile support for Avalon ( default disabled ) -enable-avalon 2 Compile support for Avalon2/3 ( default disabled ) -enable-avalon 4 Compile support for Avalon4/4.1/6 ( default disabled ) -enable-avalon 7 Compile support for Avalon7 ( default disabled ) -enable-avalon 8 Compile support for Avalon8 ( default disabled ) -enable-bab Compile support for BlackArrow Bitfury ( default disabled ) -enable-bflsc Compile support for BFL ASICs ( default disabled ) -enable-bitforce Compile support for BitForce FPGAs ( default disabled ) -enable-bitfury Compile support for BitFury ASICs ( default disabled ) -enable-bitmine_A1 Compile support for Bitmine.ch A1 ASICs ( default disabled ) -enable-blockerupter Compile support for ASICMINER BlockErupter Tube /Prisma

#Cgminer rejected low difficulty share code#